PRO model anti-static firefighting suit for firefighters, consisting of jacket and over-trousers, assembled with four different fabrics:

Outer fabric in meta-aramid Rip-Stop (anti-tear) IOR (water-oil-repellent) antistatic 220 g/m² Oeko-tex® certified. Composition: 93% meta-aramid, 5% para-aramid, 2% antistatic fibre.
Breathable waterproof barrier made from a two-component PU/PTFE F.R. Thermal barrier made up of 100% recycled aramid felt coupled with a 50% aramid 50% viscose F.R fabric lining, for a total weight of 225 g/m² ±5%.

JACKET model PRO

– Set-in sleeves
– Stand-up American collar at neck for throat’s high protection.
– Elasticated cuffs with also an internal sleeve
– Front closure by fireproof zipper with quick release 9 mm brass chain
– N. 2 pockets positioned on the front of the jacket closed by flaps and Velcro® F.R.
– N. 1 radio pocket positioned on the left side chest.
– N. 1 torch holder fastener closed by Velcro® F.R on the right side
– N. 1 internal document pocket closed by zip
– Fabric doubling on shoulders and elbows with aramid felt padding
– Elongation of about 15 cm on the back side, in order to ensure greater protection for the operator during rescue activities.
– Perforated and F.R. certified 50 mm high yellow/grey reflective bands, positioned on the forearms, on the chest circumference and at the bottom of the jacket.

OVER-TROUSERS model PRO

– Adjustable hips with fastener on both sides, elasticated back and extended by more than 15 cm to ensure greater protection for the kidney part
– New adjustable shoulder strap.
– N. 2 leg bellows pockets closed with flaps secured by Velcro® F.R.
– Front flap with brass zip closure protected by flap fixed by Velcro® F.R.
– Doubling of fabric near the knees with shockproof padding in aramid felt.
– Reinforcement of the perineum area by doubling the external fabric.
– Leg bottom with bellows opening, closure with adjustable fastener fixed by Velcro® F.R.
– Reflective bands 50 mm high. yellow/grey perforated and certified F.R, positioned on the bottom of the trousers.

The suit is made entirely with fireproof sewing thread. Two-needle main seams.
Customizations on request.

PRO-MAX VERSION

Version with reinforcements in 380 gr carbon silicone coated aramid fabric on the shoulders, knees, elbows, with anti-wear, anti-cut and waterproof function.

* on request: Orange, Red, Yellow or Gold

On request the suit is certified according to:  SOLAS (MED)